A countertop water ionizer is designed to connect to a standard kitchen faucet. Setup is usually quick, but it helps to know the steps before the machine arrives. Always follow the manual that comes with your machine. This guide gives you a general idea of what to expect.
Before you start
- Choose a spot on the counter close to the sink and to a wall outlet.
- Make sure the area stays dry and has enough room around the machine.
- Check your faucet. Most standard faucets with a removable aerator work with the included adapter. Pull-down or specialty faucets may need a different fitting.
General setup steps
- Remove the aerator. Unscrew the small cap at the tip of your faucet.
- Attach the adapter. Fit the adapter that matches your faucet thread.
- Connect the water line. Attach the inlet tubing from the machine to the adapter and make sure it is secure.
- Place the outlet tubing. Put the drain and water outlet lines where they can run into the sink.
- Plug in the machine. Use a wall outlet away from water splashes.
- Flush before first use. Run water through the machine as the manual instructs, then check every connection for leaks.
Tips
- Never run the machine without water flowing through it.
- Keep the power plug and the machine away from standing water.
- If you move into a home with a different faucet, check that the adapter still fits.
Need help?
If you have trouble with your setup, contact the AlkaFarm team or check the FAQ.
This article is general information about home water products. It is not medical advice. If you have a health condition or questions about your diet, please talk to your doctor.